Custom Hydraulic Seals

colorful o-ring assortment colorful o-ring assortment

Custom Hydraulic Seals

When off-the-shelf hydraulic seals cannot withstand your application’s extreme pressure spikes, aggressive fluid chemistries, or non-standard gland dimensions, R.E. Purvis delivers custom hydraulic seals engineered specifically for your equipment.

Custom Hydraulic Seals from R.E. Purvis

Standard catalog seals often force design engineers to alter cylinder housing dimensions or compromise on extrusion resistance. At R.E. Purvis, our custom engineered solutions prioritize flexibility, speed, and long-term operating reliability:

Low Tooling Prices

Optimized mold designs and advanced machining keep upfront tooling costs low, so a custom seal is a practical choice and not a last resort.

Short Lead Times

Streamlined development speeds up turnaround on prototypes and production orders, which keeps your cylinder builds on schedule.

“Engineering-First” Technical Support

Our specialists work with your team early, reviewing gland dimensions, extrusion gaps, surface finishes and stroke speeds before tooling is cut.

Rapid Prototyping & Validation

3D-printed prototype models let you check fitment, interference and housing alignment before you commit to production tooling.

Strategic Supplier Diversity

WBENC-certified, 100% Women-Owned Business (WBE). Meet supplier diversity goals without giving up technical depth.

Engineered Materials for High-Pressure Fluid Power

Choosing the proper material compound is essential to preventing seal extrusion, lip wear, and thermal degradation under severe hydraulic loads. We supply custom hydraulic seals in a broad spectrum of high-performance polymers and elastomers.

MaterialBest For
Polyurethane (Urethane)High pressure, abrasion and extrusion resistance. The workhorse for rod and piston seals
Nitrile / NBR (Buna-N)Petroleum-based hydraulic fluids in moderate-temperature, general-purpose applications
HNBR (Hydrogenated Nitrile)Higher heat and better wear resistance than standard nitrile
FKM / Viton®High temperatures and aggressive or synthetic fluids
Machined PTFE / Teflon™Low friction, high speed and broad chemical resistance. Often energized or paired with backup rings
Nylon & Engineered ThermoplasticsBackup rings and wear rings that resist extrusion and guide the rod and piston

When Do You Need a Custom Hydraulic Seal?

Custom hydraulic seals are required whenever standard catalog seals compromise cylinder efficiency, leak-free operation, or equipment service life. Typical engineering scenarios include:

Non-Standard Bore & Rod Sizes

Seals sized to your existing hardware, so you never have to redesign the cylinder housing.

Severe Pressure Spikes & High Dynamic Loads

Profiles and backup rings built to resist gap extrusion under hydraulic shock loads.

Aggressive Fluid Chemistries & High Temperatures

Compounds matched to synthetic, fire-resistant or biodegradable fluids and elevated operating temperatures.

Severe Contamination & Harsh External Elements

Custom wipers and scrapers keep dirt, mud and moisture out of the cylinder.

Low-Friction & High-Velocity Actuation

PTFE-based profiles reduce stick-slip, heat buildup and lip wear at high stroke speeds.

hydraulic seals hydraulic seals

Operational Integration

R.E. Purvis delivers value beyond the individual component by integrating custom hydraulic seals directly into your manufacturing workflow:

- Custom Kitting & Assembly

- Vendor-Managed Inventory (VMI)

Frequently Asked Questions

Custom Hydraulic Seals

A custom hydraulic seal is recommended when non-standard cylinder rod or bore dimensions are used, when extreme pressure spikes exceed standard material extrusion limits, or when operating fluids require specialized elastomeric compounding. Customizing the seal eliminates the need to redesign cylinder housing hardware.

We leverage optimized mold design practices, advanced machining, and efficient domestic production routes. By pairing over 35 years of engineering experience with streamlined development processes, we minimize upfront tooling investments and shorten turnaround times for prototype and production orders.

We engineer a full range of custom hydraulic seal configurations, including rod seals, piston seals, head seals, wear rings, bearing isolators, rod wipers/scrapers, and high-pressure back-up rings.

Yes. Utilizing 3D printing and SLA/FDM rapid prototyping technologies, we can quickly produce physical prototype models to test fitment, interference, and housing alignment prior to investing in production tooling.

High-durometer Polyurethane (Urethane) and machined PTFE paired with hard thermoplastic backup rings (such as Nylon or PEEK) offer superior resistance to gap extrusion and dynamic lip wear under severe hydraulic shock loads.

Our technical team provides hands-on engineering support during the initial design phase. We analyze hardware surface finishes, dynamic stroke speeds, compression set rates, and maximum extrusion gaps to ensure complete seal reliability.

Yes. Through our Custom Kitting & Assembly services, we can group all required rod seals, piston seals, wear bands, O-rings, and wipers into a single kit part number. This simplifies purchasing, streamlines inventory management, and speeds up factory assembly.

All custom component development and distribution processes at R.E. Purvis operate under strict ISO 9001:2015 quality management standards, ensuring material traceability, dimensional accuracy, and consistent batch-to-batch performance.

Ready to Design Your Custom Hydraulic Seal Solution?

Overcome catalog restrictions and protect your equipment against seal failure. Share your bore, rod and operating conditions, and our engineers will recommend a seal built for low tooling costs, fast delivery and reliable field performance.

CAPTCHA